Top 10 Best Stud Finders In 2019 (Latest Reviews & Helpful Buyer’s Guide)

There are many different kinds of stud finders. And that’s why I thought a list with some of the best stud finders will be helpful for you.

A stud finder is used to find framing studs (basically the wooden frames) in a building. You need one of these in your DIY arsenal to find these studs behind drywall so when you are hanging something heavy off your wall (like a TV or a kitchen cabinet) your drilling into the frame, not just the drywall.

Last Updated on the 22.09.2019 

an image of one the best stud finders available today
Best Stud Finder: Franklin 710 ProSensor
Great stud finder when it comes to accuracy Used by many professional builders and DIYers as well to find metal or wood studs in different type of walls. And the good thing is that is NOT that expensive. With more than 3200 Reviews on Amazon, you can’t go wrong 🙂 Read reviews by clicking below!

You can jump to the stud finder buyer’s guide if you’re new to these tools and need some more info or get to the stud finder reviews section to see which ones made the top list.

These stud finders can be electric, magnetic, radar-based and even ones that work from your smart-phone! This list contains the right tool for any of your needs, so without further ado here’s a quick comparison table to quickly check which one may be suitable for your needs.


So Here Is My List Of The 10 Best Stud Finders

These stud finders are not listed in any particular order.  By the way, as I’ve discovered a couple more good stud finders I’ve decided to add them to the list as a bonus if you want. So, there’ll be 12 in total. It’s impossible for you to not find your today 🙂 Enjoy the reading!


Tavool TH250 – Best electronic stud finder

Great For Electricians

This Tavool is a great 4 in 1  tool.  It’s an electronic wall scanner than can perform four distinct scanning methods for you: wood, beam, joist, metal, AC cables, as well as deeply integrated items behind the ground, ceiling, wall. Go ahead and read more opinions and reviews on Amazon by clicking below.

☛ Read Reviews On Amazon

Our top choice is the Tavool TH250 4 in 1 Electronic stud-finder. This product has safety as its first priority, meaning that as well as finding the studs behind your drywall, in all modes it is also sensitive to electronic wires, metal pipes, joists and other unexpected objects located in your drywall.

Needless to say that while doing your DIY, you don’t want to accidentally attach a heavy object to any of these, and this is where the Tavool TH250 stands out with it’s 4-in 1 mode allowing you to detect areas of drywall to avoid as well as those to secure your product to.

Furthermore, it’s deep mode allows you to detect unexpected objects to a depth of 2.36 inches, so you don’t have any surprises when doing your DIY.

As well as the 4 in 1 mode, the LCD screen and sound warnings, which become louder the closer you are to a target, allow you to find the area you DO want to attach your object to quickly, saving you time and effort. It’s ergonomic grip also makes for comfortable use no matter which awkward part of your room you are operating in.

  • Brand: Tavool
  • Model: TH250
  • Power source: 9V battery required
  • Weight: 5.6 ounces

  • LCD design
  • Audible homing device
  • Detection of live-wires in all modes
  • 2-year warranty

Click here to find out how much this Tavool stud finder cost on Amazon.

PROS:
  • 2-year warranty
  • Excellent price for what it does.
  • Ergonomic grip

CONS:
  • Batteries not included
  • Heavier than other models

 >>> Read full details about this Tavool Stud Finder Sensor Wall Scanner on Amazon <<<


ViVSF-01: Best for tile walls

Great 4 in 1 Wall Scanner

The difference between great DIY home renovation project and a huge catastrophe could be owning nice stud finder. Trust me, if you start hammering your walls without knowing what’s on the other side, you’ll be in for a big surprise! Get a stud finder today! Go ahead and read more opinions and reviews on Amazon about this tool by clicking below.

☛ Read Reviews On Amazon

Our next best stud-finder choice is the Vivreal ViVSF-01 . Similar in many ways to the TH250, it has the same sound warnings, LCD display and four scanning modes to find beams, pipes, deep objects and wires. Where it differs is in the easy front slider it possesses, allowing you to clearly see which mode you are in rather than relying on an LCD display.

At 4.8 ounces it is also lighter than the TH250, making for a marginally easier grip. Like the TH250 it also contains automatic calibration, meaning it automatically calibrates itself when you place it upon a section of wall with no metal, wood studs or AC wires.

This is important for reliability since an unreliable stud finder is about as useful as a chocolate teapot.

  • Brand: Vivreal
  • Model: ViVSF-01
  • Power source: 9V battery required
  • Weight: 4.8 ounces

  • Audible homing device
  • One button to select four different modes
  • Graphic LCD display

Click here to find out how much this Vivreal Wall Scanner cost on Amazon.

PROS:
  • Four in one detection device
  • Excellent price for what it does
  • Multiple detection modes

CONS:
  • Wire detection in one mode only

 >>> Read full details about this Vivreal stud finder multi wall scanner on Amazon <<<


CH Hanson 3040: Most Rated Stud Finder

Cheap Magnetic Stud Finder

This cheap magnetic stud finder uses some real strong magnets to determine the exact location of screws or nails in a wall. Probably the greatest advantage is that this tool will never need calibration or use of batteries. Why don’t you go ahead and read some more opinions and reviews on Amazon about this tool by clicking below?

☛ Read Reviews On Amazon

If you feel that you don’t need the superfluous features offered by the ViVSF-01 or the TH250, then the CH Hanson 3040 is the item for you. Plus it has a ridiculous amount of reviews on Amazon. (over 10.000 reviews as of September 2019)

This is the cheapest stud finder on my list. (actually this might be one of the reasons of having so many reviews)

This stud detector does what it says on the tin but little more. Unlike the modern electric entrances found on the market, this model works through magnetic technology, meaning it doesn’t require batteries and is ready for use immediately upon purchase.

So if you don’t want to get confused in a mess of modern features, if you don’t want to spend a lot of money, or if you simply have a penchant for the old-fashioned, then this is the model for you.

*** Another very cheap stud finder that people seem to like is the Studpop Magnetic Stud Finder. Check it out if you really want to compare two of the best magnetic stud finders out there

  • Brand: CH Hanson
  • Model: 03040
  • Power source: No batteries required
  • Weight: 0.16 ounces.

  • Easy to handle with a very soft grip
  • Magnets allow for use without your hands
  • Small- easy to fit in your pocket or tool belt.

Click here to find out how much this cheap CH Hanson Magnetic Stud Finder cost on Amazon.

PROS:
  • Cheap
  • Simple to use
  • No batteries required
  • Very lightweight (0.16 ounces)

CONS:
  • Does not have all the features of electronic counterparts
  • Only scans to a depth of 1 inch unlike electronic counterparts

 >>> Read full details about this CH Hanson Magnetic Stud Finder on Amazon <<<


Zircon Multiscanner 740: Best Professional Stud Finder

Excellent For Builders

If you’re a professional builder and accuracy is important to you, the Zircon 740 comes with unique floating head design, easy one-handed operation, and updated density analyzing software to make your job much easier. Read more opinions and reviews on Amazon about this tool by clicking below?

☛ Read Reviews On Amazon

If the price is not an issue and you want to get the job done than the Zircon 740 is the model for you.

Like the TH250 it has four built-in modes that allow for the detection of hidden metal objects and studs, and the detection of unshielded wires in all modes, so there is no chance of your DIY dream becoming a nightmare. It also contains an integrated erasable wall marker that allows the user to mark certain spots effortlessly.

It’s sophisticated electronic design also allows it to detect pipes made from a non-magnetic metal, distinguishing it from magnetic based stud detectors like the CH Hanson 3040. It possesses a signal strength indicator to distinguish between deep and shallow targets, so you know exactly where these ‘hidden’ things behind your drywall are.

Finally, it possesses ACT (auto-correcting technology) which corrects common user errors such as beginning a scan in front of a stud. While such an error would phase other models, not the Zircon 740. It’s the premium pick, and so the one to buy if you want the best experience and are not concerned about the price.

  • Brand: Zircon
  • Model: 740
  • Power source: 9V batteries required
  • Weight: 4.8 ounces

  • Auto-correcting technology
  • Erasable wall marker
  • Four detection modes including wire detection in each mode

Click here to find out how much this cheap Zircon 740 MultiScanner cost on Amazon.

PROS:
  • Erasable marker allows for one-handed usage
  • Detection of non-magnetic metal
  • Ability to find the center and edges of studs

CONS:
  • Relatively expensive compared to other models
  • Batteries not included

 >>> Read full details about this Zircon MultiScanner 740 Electronic Wall Scanner on Amazon <<<


Black and Decker BDL190S: Best stud finder and laser level

2 in 1 Laser Level+Stud Finder

This multi function stud finder from Black and Decker it’s an amazing tool for all of you DIYers. Great for detecting wood and metal studs in your walls before actually starting drilling wholes and hang pictures. Read more opinions and reviews on Amazon about this tool by clicking below.

☛ Read Reviews On Amazon

If you do happen to be looking for an alternative to the magnetic or electronic models listed so far, this Black and Decker BDL190S stud detector may be the one for you.

With patented auto-leveling technology, this device uses lasers so as to ensure that when you are placing objects on your walls you are doing so with precision and evenness, and you are doing so with ease. So you will never have to worry about that picture being wonky again.

Like most other models, the BDL190s is also able to detect live wires, metal, wood, studs and many other hidden or unsurprising objects you may find in your drywall.

If buying such an innovative and different product is a concern for you, then there is no need to worry as it comes with a 2-year limited warranty.

  • Brand: Black and Decker
  • Model: BDL190s
  • Weight: Sixteen ounces

  • Two in one stud finder and auto-leveler
  • Auto-levelling laser
  • LCD screen
  • Two years limited warranty

Click here to find out how much this Black & Decker BullsEye BDL190S cost on Amazon.

PROS:
  • Leveling technology
  • Two-year limited warranty.
  • An LCD display that is easy to read

CONS:
  • At one pound, this is one of the heavier models
  • Relatively expensive compared to other models

 >>> Read full details about this Black & Decker BDL190S BullsEye Stud Finder on Amazon <<<


Zircon m40: Best stud finder for plaster walls

The best for lath and plaster

This Zircon is a handheld stud finder that will help you solve the problem of finding studs in plaster and lath in walls without metal mesh by finding the nails pattern that attaches the wood lath to the studs. Read more opinions and reviews on Amazon about this tool by clicking below.

☛ Read Reviews On Amazon

Zircon also produces a more downscale model from the 740 that may be more suitable for those needing to detect metal on a bit of a budget.

Using the same electronic detection methods as the 740, the Zircon M40 is able to detect both ferrous and non-ferrous (that is, magnetic and non-magnetic) metal. It thus has uses beyond wall decoration in, for example, plumbing, nail finding, screw finding, in walls, floors, and ceilings.

It’s thus an ultimate handyman tool, for multiple uses. It’s also able to find objects at quite a significant depth, finding non-ferrous metal at 2 inches deep and ferrous metal at four inches deep. Thus with the Zircon m40, you can be sure you won’t have any hidden surprises.

Unfortunately, it lacks the ACT technology and the marker that distinguishes the 740, however, if these were features that did not interest you it’s a full $20 cheaper.

Finally, it’s bright yellow color means you’d be hard pressed to lose it among your other tools.

  • Brand: Zircon
  • Model: M40
  • Power source: Batteries required- 9V
  • Weight: 9.6 ounces

  • Metal detector for both ferrous and non-ferrous metals
  • Ergonomic design
  • LED lights

Click here to find out how much this Zircon M40 Multiscanner stud finder cost on Amazon.

PROS:
  • Cheaper and lighter than other Zircon products
  • Battery included
  • Advanced metal detection functions

CONS:
  • Lacks the features of other products

 >>> Read full details about this Zircon M40 Multiscanner stud finder on Amazon <<<


Franklin Sensors ProSensor 710: Most accurate stud finder

The best for lath and plaster

This stud finder is the most accurate stud finder because unlike the most stud finders on the market that uses 1 or 2 sensors to detect studs, the Franklin 710 uses 13 sensors. Amazing, isn’t it? Read more opinions and reviews on Amazon about this tool by clicking below.

☛ Read Reviews On Amazon

A product for professionals and amateurs alike, the Franklin Stud Finder Pro Sensor 710 utilizes 13 sensors to analyze multiple sections of the wall to find the best section for you to place your attachment.

The numerous sensors present eliminates the need for calibration, ensuring that you can get the job done as quickly and efficiently as possible. Having multiple sensors embedded into the same device also allows you to detect multiple studs at the same time and, more importantly, detect their width.

It covers 21 inches of a wall in a typical scan, compared to the 2 inches covered by other models of stud finder.

It’s thus useful if you are looking to attach multiple fixtures to your wall at the same time. Plus, unlike other models, it only requires 2 AA batteries, easier to find than 9V ones, and is Amazon’s choice for products in this category.

  • Brand: Franklin
  • Model: ProSensor 710
  • Power source: 2AA batteries required
  • Weight: 6.4 ounces

  • 13 sensors
  • A wide 21 inch wall sensing area
  • Always active deep scanning, no extra steps to activate deep scanning

Click here to find out how much this Franklin 710 Pro Sensor stud finder cost on Amazon.

PROS:
  • Runs on easy to procure batteries (2AA)
  • Easy to use
  • High levels of accuracy

CONS:
  • Expensive for a product of this type

 >>> Read full details about this Franklin 710 ProSensor stud finder on Amazon <<<


Accufinder c110: Best value stud finder

Great value for your money

Easy to use stud finder. The Accufinder C110 instantly detects studs with simply pressing a button. It’ll show you the width of the studs and the LED’s will lit thus identifying both edges and the center of the studs at the same time.  Read more opinions and reviews on Amazon about this tool by clicking below.

☛ Read Reviews On Amazon

A similar model to the Franklin Sensors ProSensor 710, the Accufinder c110 has the same multiple stud finding technology however in a slightly less sophisticated form, with only eleven sensors and six inches of the scanning area.

However this model comes in at slightly cheaper than the Franklin, and requires no batteries at all, so if the area of the wall you need to inspect just so happens to be smaller, and you want a model with less set-up required than this may be the choice for you.

With no batteries at all required, no calibration required and deep scanning always on, this may well be the simplest option for craftsmen still looking to scan a large section of wall.

  • Brand: Accufinder
  • Model: C110
  • Power source: 2AA batteries required
  • Weight: 8 ounces

  • Eleven sensors
  • Six inches of wall scanning
  • No calibration required

Click here to find out how much this Accufinder C110 Ultrasensor stud finder cost on Amazon.

PROS:
  • Cheaper than similar models
  • No batteries or calibration required
  • Always has deep scanning on

CONS:
  • Not many reviews on Amazon or other DIY websites

 >>> Read full details about this Accufinder Ultrasensor C110 stud finder on Amazon <<<


Stanley FMHT77407 FatMax: Stud finder with ac detection

Excellent for Electricians

Easy to use stud finder. The Accufinder C110 instantly detects studs with simply pressing a button. It’ll show you the width of the studs and the LED’s will lit thus identifying both edges and the center of the studs at the same time.  Read more opinions and reviews on Amazon about this tool by clicking below.

☛ Read Reviews On Amazon

Another bright yellow stud finder you won’t lose in your tool kit, what makes the Stanley FMHT77407 FatMax stand out is its LED signaling and audible signals that makes DIY in poor lighting conditions that much easier.

Like the Zircon 740, it also possesses marking technology, avoiding the clumsy one-handed scratchings of pencils or pens on your wall surface. It also can detect wood up to two inches deep and metal up to one and a half inches deep.

  • Brand: Stanley
  • Model: FMHT77407 FatMax
  • Power source: 9V battery required
  • Weight: 6.4 ounces

  • LED signaling
  • Audible signaling
  • Marking technology

Click here to find out how much this Stanley FMHT77407 FatMax stud finder cost on Amazon.

PROS:
  • Cheaper than similar models
  • Backlit LCD screen to display
  • AC detection up to 2″ deep

CONS:
  • Batteries not included
  • Calibration required

 >>> Read full details about this Stanley Fatmax FMHT77407 stud finder on Amazon <<<


Bosch GMS120: Digital stud detector

Deep detection stud finder

This Bosch GMS120 digital scanner it’ll be of great help having three modes that will be able to discover wood studs, metal things like rebar, steel and copper pipes or live cables. Read more opinions and reviews on Amazon about this tool by clicking below.

☛ Read Reviews On Amazon

Another laser based stud finder, this Bosch GMS120 uses s the latest three sensor laser technology to detect objects up to 4 ¾ inches deep in cured concrete, up to 2 inches deep for wires and up to three inches deep for copper.

It is thus a suitable product for those with thick walls or worried about the effective depth range of the other products. It furthermore is able to have an automated self-calibration system that continually calibrates throughout a project, so you are sure that you are getting the best results throughout.

Finally it’s easy to understand LCD display communicates clearly where there is no object (green flash), where there is an object nearby (orange flash) and when there is an object within the sensor range (red). This easy to decipher advice is thus ideal for amateur as well as professional homemakers.

  • Brand: Bosch
  • Model: GMS120
  • Power source: 9V battery required
  • Weight: 1.1 pounds

  • Deep detection mode
  • LCD display
  • Automated self-calibration system

Click here to find out how much this Bosch Digital Multi-Scanner GMS120 cost on Amazon.

PROS:
  • Deep detection mode
  • Batteries included
  • Warranty included

CONS:
  • Heavy (or heavier than other models)
  • Mediocre reviews on Amazon

 >>> Read full details about this Bosch Digital GMS120 stud finder on Amazon <<<


DeWalt DW0150: Good metal stud detector

Great for Wood and metal

This DeWalt stud finder it’s a bit different than most traditional stud detectors in that it’ll not only find the stud behind the wall, but it will tell you as well where the edges of the studs are. Read more opinions and reviews on Amazon about this tool by clicking below.

☛ Read Reviews On Amazon

Another great stud finder product that features marking technology and automatic calibration. The additional advantage of this convenient stud finder is that it comes in at a relatively cheap price point compared to products with these similar features.

Furthermore, the DeWalt DW0150 it features continuous wire detection for additional safety, so you do not have to worry about tripping your house’s electrics.

This, in addition to the automatic calibration, would make this an underrated product in my opinion as having many of the features of our best choice and premium pick products but at a much lower price point. Finally, with no batteries required, you do not have to worry about the device ever running out on you in the middle of an important task.

  • Brand: DeWalt
  • Model: DW0150
  • Power source: AAA batteries included
  • Weight: 8 ounces

  • Deep detection mode
  • LCD display
  • Automated self-calibration system

Click here to find out how much this DW0150 DeWalt Stud Finder cost on Amazon.

PROS:
  • Automated calibration
  • Marking technology
  • AC and live wire detection

CONS:
  • Very thin plastic that could break easily in your toolbag

 >>> Read full details about this DeWalt DW0150 1-1/2 in. Stud Finder on Amazon <<<


Wallabot DIY: Best stud finder app

Excellent For Mobile Phones

Personally, I believe that once people discover this tool, it will quickly become the best stud finder for professionals and DIYers. It produces a visual image of what’s behind the wall so you don’t have to guess anymore! Read more opinions and reviews on Amazon about this tool by clicking below.

☛ Read Reviews On Amazon

My final product in the list, the Walabot DIY stud finder, combines radar technology with the technological capabilities in your smart-phone for a comprehensive experience and maximum security.

For plumbers, electricians, contractors, pest controllers and others in need of advanced level wall imaging, it is the perfect tool for the job, with images thus being able to be saved and shared with other relevant contractors so as to be able to develop a blueprint of your house.

The panoramic mode allows you to detect all objects behind your wall in one quick scan, giving it a huge scanning area compared to other stud detectors. Expert mode allows you to confirm objects and their precise location seen panoramic mode, including seeing the curves and intersections between two objects.

However, it is reliant on both purchasing the product from Amazon and syncing it to the application which needs to be downloaded onto an Android device, and as such it is definitely the most complicated product in our list to set-up, as well as one inaccessible for tradesmen lacking an Android smartphone.

Nonetheless, the results it produces, in terms of imaging clarity, definitely make it worth the while if a serious DIY project is needing to be undertaken.

  • Brand: Walabot DIY
  • Model: DY20BCGL02
  • Power source: No batteries required
  • Weight: 6.4 ounces

  • Cellphone based
  • Panoramic mode- allows you to see all objects behind your wall
  • Expert mode- allows you to see the precise contours of each image

Click here to find out how much this Walabot DIY Wall Scanner cost on Amazon.

PROS:
  • Variety of modes, suitable for high-level professionals or amateurs
  • Based on cellphone, able to save recorded images for later
  • High quality, professional and deep results

CONS:
  • The most expensive and complicated to use product in this list
  • Not compatible with all cellphones (sorry iPhone users!!!).

 >>> Read full details about this Walabot DIY Stud Finder App on Amazon <<<


Buying Guide – What To Look For When Buying A Stud Finder?

an image of a stud finder representing the stud finder buyer's guide section of the main article

What is a stud finder?

Stud finders, simply put, are objects which use magnets, electronics, lasers or radar to find out what is behind the drywall.

How to choose a stud finder?

The three most important things to consider before buying is

1) What kind of job you are undertaking.

2) How much you already know about what is in your wall and

3) How wide an area of wall you need to find information about.

Their most applicable use is usually to find a solid foundation on your wall to hang heavy objects like flatscreen TVs or paintings, but stud detectors have also become used by plumbers, electricians and pest control in order to access your walls for important work while avoiding undermining the structure of the house, or creating you unwanted plumbing or electrical problems.

The number one thing to have in mind when you are buying a stud detector is simply what job you want to get done. If you only want a small section of wall analyzed, and you know for a fact that there are no wires or pipes that should get in your way than the simpler models should suffice.

If you are trying to find the perfect spot to hang up multiple objects, and are not sure where pipes or wires are located than the more advanced models, particularly the ones that are able to detect non-metallic pipe.

So the most important thing to look for when buying a stud finder is what features it has and what jobs it is able to do.

If you are not a contractor of any description, it may be tempting to write off having a stud-finder as excessive, however it is a helpful tool to have around the house if you ever find yourself in the need to redecorate or install a flat-screen TV, and what to save yourself the money by doing it yourself.

Where to buy a stud finder?

You can buy a stud finder at any of your local hardware stores. Obviously the bigger the store, usually the more models they’ll be able to offer you.

But, if you’re looking to buy a stud finder from the comfort of your own home, then Amazon is obviously a great place to check out a bigger range os stud finders for all your needs and budgets.

FAQ About Stud Finders

Q: Will stud finder work through plywood?

A: Depends on the model, but most of the stud finders should work through plywood (it’ll come down to how thick they are in order to be able to analyze)

Q: What does a stud finder detect?

A: Depending on the model, but a stud finder can detect anything from the framing studs (it’s in the name lol) that spread a load of a structure from the vertical to the horizontal beams, to electric wires, metal pipes or even moving objects behind the walls.

Q: Are stud detectors any good?

A: They are a useful tool for both homeowners and professionals and given they can do so many different things, I would say yes, stud detector are good tools to have around.

Q: Can stud finder detect pipes?

A: As this listicle demonstrates, in most cases, yes, a stud finder can detect pipes!!

Also You Might Be Interested In Reading About:

Hello everyone. I’m Adrian, I’ve been working in the construction industry for the last 5 years or so … doing all sort of jobs from handyman to crane operating and everything in between :) I am a blogger as well at ninjaDIY.com … where I talk about anything related to construction, building, power tools, DIY home improvement and much more.

Your comments are welcome!

      Leave a reply

      This site uses Akismet to reduce spam. Learn how your comment data is processed.